Heart Rate measurement – ECG accurate
1. Heart rate monitoring without chest strap utilising accurate Quicktouch™ technology.
Click here for more information > > >- Non continuous finger touch.
2. New one finger touch with fast response 4-8 secs.
3. Measures heart rate from 40-200 bpm (beats per minute)
4. Upper and lower HR zone alert
5. Percentage of age adjusted maximum heart rate displayed
6. Four HR Zones – 1 user zone for user selection and 3 predefined HR zones -Aerobic, Fat Burn and Health. - Chronograph Mode
1. Resolution 1/100 seconds.
2. Measuring range: 9 hours 59 mins 59 seconds.
3. Maximum 30 laps - Pedometer Exercise Mode
1. Triaxial movement 2G sensor allows accurate step, speed and distance calculation.(See FAQ)
2. 5 sensitivity levels
3. Speed KPH, Average speed and distance.
4. Step, fat, cal count, exercise time
5. Auto rest on/off. - Clock function
1. Hour, minute and second display
2. 12/24hr format selectable
3. Auto calendar/day/month/year
4. Hourly chime and daily alarm - Countdown timer
1. 1 second resolution
2. Up to 9hr 59min 59 second - EL back light Beep tone for mode changing and into setting mode
- Water resistant
- One year warranty.
- Sizes available:
1. Large – 43mm diameter – 250mm maximum wrist size
2. Small – 38mm diameter – 240mm maximum wrist size
How does the triaxial sensor work?
A mechanical pedometer has one sensing axis. So it only works at a particular orientation. This watch uses a triaxial g-sensor. Individual sensors are configured in the x-yxz plane respectively. It senses acceleration experienced by the watch in all 3 axis continuously and looks for continuous and repetitive STEP patterns. The software will try to figure STEPS from the complex patterns created by the dynamic hand movement. So it does not have to be mounted in a specific orientation.
How do you determine which sensitivity level to set the watch to?
It is based on the step counting of the person. If the watch always counts more steps, reduce the sensitivity level. If the watch counts less than actual, increase the sensitivity level.
Can the sensor pick up the steps if the arms are not swinging freely? E.g. walking while pushing a trolly/pram?
The watch counts periodical repetitive patterns. So it has to have some kind of motion to trigger the counting. It may be the swinging of an arm, it may be the vertical (up/down) body movement during walking or running. When we are pushing a trolly in a natural way, there is a force coming from the stepping forward movement and the sensor is able to recognize such movements as steps even you do not swing the arm.
How do I reset the daily data such as steps, calories, distance etc?
The daily reset function happens automatically at 3am if the Daily reset function is turned on. This is how you turn on the daily reset function:
- In current time mode hold the Mode button until the ‘seconds’ start flashing.
- When the ‘seconds’ are flashing keep pressing the Mode button as it goes through the watch set up until you come to the screen which says DAILY ZONE r SE and then press the Lap/Reset button until you get ‘ON’ flashing at you. You have just turned the daily reset function on.
- Get out of the set up mode by holding the Mode button down until you get the current time display.
